1/2

NE8FDH-M-Mb

etherCON Magnetics are horizontal PCB etherCON chassis connectors with integrated magnetics providing galvanic isolation and overvoltage protection.

These features save PCB space within the device design and provide improved frequency response when compared to standard designs.

Attention: this product is strictly not intended for use in PoE systems. Use in PoE systems may damage the connector.

Features & Benefits

Integrated magnetics circuitry within the chassis connector
Space-saving design, as it removes the need for HF part otherwise required on the customer motherboard.
Components used: transformers, ferrite core and Bob Smith termination for the automatic termination in case of no cable connection
Saving costs on PCB (~20 parts) Support voltage mode applications
Support voltage mode applications
In case of overvoltage harm, the connector can be exchanged, and the main board is still safe.
Cat 5e (100Mbits and 1Gbits) transmission performance according to IEEE 802.3, 802.3b, and 802.3ab standards
Lowest crosstalk attenuation with the use of machined-designed transformer
Overvoltage protection up to 2 kVGround-panel connection
Ground-panel connection
Overvoltage protection >2 kV for 1Gb/s available via optional customer-installed capacitor

Note: not compatible with etherCON Cat 6 NE8MC6-MO

Downloads

Technical Information

Produkte
Title	NE8FDH-M-Mb
Gender	Female

Elektrisch
Dieletric strength	1 kVdc
Insulation resistance	> 0.5 GΩ
Number of electronical contacts	5
Rated current per contact	1.5 A
Rated voltage	< 50 V
Transmission performance	100 Mbps (Class D)
Frequency range	1-100 MHz
PoE	This product is strictly not intended for use in PoE systems.

Umwelt
Temperature range	-30 °C to +80 °C
Maximum Operating Temperature	+80 °C
Flammability according to UL 94	V-0
Protection class according to IEC 60529	IP 40
Pollution degree according to IEC 60664-1	Pollution degree 2
Solderability	Complies with IEC 60068-2-20
Explosion environment	Not intended to be used within explosive environments