The hardware of the powerMONITOR is prepared to enable such a possibility. The corresponding software could be developed on request.
The hardware of the powerMONITOR is prepared to enable such a possibility. The corresponding software could be developed on request.
Yes, you will! The powerMONITOR helps saving money, eliminating the need of fixed maintenance intervals.
It avoids needless cleaning and expensive measurements by reporting attenuation increase related to a fixed value.
Yes, this is one of the most distinguishing features compared to an ordinary fiber optic power meter.
The powerMONITOR is more than that. It is able to monitor fiber optic attenuation of up to 4 channels simultaneously even while being on air. The cost effective design allows the widely use of the device in order to establish a comprehensive monitoring of all active fiber optic transmission channels.
The powerMONITOR offers a power supply by an internal battery. If external source failures the integrated software activates automatically to the battery mode.
As long as the power supply complies the required specifications (5 Vdc, 3 A) and the corresponding XLR-connector it will not affect the functionality of the powerMONITOR.
For rechargeable batteries set "ACCU Auto \ & ƒ"-mode (see User Manual: 9. Power Control Section). With this setup the powerMONITOR verifies the current battery status and starts with the charging procedure if required. The battery will be frequently discharged and recharged which extends battery lifetime.
In case of required instant charging adjust the powerMONITOR according section 8 "Battery Status / Instant Charging" in the user manual.