NEUTRIK GROUP NEUTRIK REAN CONTRIK
NEUTRIK
NEUTRIK GROUP REAN CONTRIK
ZH
Select a country and a preferred language
Country
Language
Neutrik
NBNC75B*X
neutrik / / NBNC75BQP11X

NBNC75BQP11X

Download Data Sheet

The rearTWIST UHD BNC connectors are specifically designed for high resolution video signal transmissions. Due to the unique insulator and contact pin design, the connectors feature low return loss values for 4K and 8K signals.

Features & Benefits
  • Optimized contact pin and insulator design for UHD-data transmissions
  • Proven rearTWIST technology
  • Swiss antraloy plating
  • Fully compatible with conventional BNC chassis connectors
  • Improved return loss values at high frequencies
下载
st-nbnc75b-uhd-1
pdf - 36.28 KB
st-nbnc75b-uhd
dxf - 272.76 KB
BNC Cable and Connector Guide
pdf - 627.89 KB
bda-398---uhd-bnc
pdf - 1.19 MB
05 Section BNC Connectors PG 202311 EN -V25
pdf - 3.94 MB
white-paper-neutrik-uhd
pdf - 1.82 MB
uhd-bnc-measurement
pdf - 5.29 MB

Technical Information

Product
Title NBNC75BQP11X
Connection Type BNC 75 Ω
Gender male
Electrical
Contact resistance ≤ 3 mΩ (inner)
Contact resistance ≤ 2 mΩ (outer)
Dielectric strength 1.5 kVdc
Impedance 75 Ω
Insulation resistance > 5 GΩ
Rated voltage < 50 V
VSWR ≤1.06 / >30 dB up to 6 GHz ≤1.13 / >24 dB up to 12 GHz ≤1.22 / >20 dB up to 18 Ghz
Mechanical
Cable O.D. 6.3 mm
Cable retention > 30 N (center)
Crimp size 6.47 Hex crimp (shield)
Crimp size (pin) 1.07 crimp
Insertion force < 25 N
Lifetime > 1000 mating cycles
Locking device Bayonett
Cable anchoring Jacket crimping
Material
Contacts Brass (CuZn35Pb2), 0.2 µm AuCo (center contact)
Shell Brass (CuZn39Pb3)
Shell plating Antraloy
Insert PP
Environmental
Temperature range -30 °C to +85 °C
Contact crimpability Complies with IEC 60803 and IEC 60352-2
Accessories
video
bst-bnc.jpg
BST-BNC-*

rearTWIST BNC电缆连接器彩色尾套

video
cas-bns-t.jpg
CAS-BNC-T

BNC工具箱,内含BNC电缆连接器组装用的理想工具

video
cs-bnc-rt.jpg
CS-BNC-RT

同轴电缆剥线钳,适用电缆直径4.0 - 8.0 mm

die-r-bncx-pu.jpg
DIE-R-BNCX-PU

HX-R-BNC的压接工具 压接引脚: 1.07 mm 屏蔽层和护套: 6.47 mm (A), 7.36 mm (B)

hx-r-bnc.jpg
HX-R-BNC

压线钳

注意:适用模块为:DIE-R-* DIE-R-BNC*

rearTWIST UHD BNC Features
Optimized Return Loss

Due to optimized insulator design and reduced crimp diameter from center pin the Neutrik rearTWIST UHD BNC connector achieves increased headroom compared to conventional BNC connectors and offers additional return loss reserve for potential impedance deviations resulting from cable bending, incorrect connector assembly or faulty connection interfaces without signal interruption.


For more details see Neutrik UHD BNC White Paper.
 

rearTWIST UHD BNC Return Loss
Crimp Dimensions

In order to achieve optimum return loss values at high frequencies the crimp dimension of the contact pin has been reduced.

Pin: 1.07 mm
Shield: 6.47 mm
Crimp die:   DIE-R-BNCX-PU


 

Approved Cables

To guarantee high performance for each cable-connector combination at high frequencies Neutrik measured common COAX cables which are specifically designed for ultra high definition transmission (UHD). Find all approved cables listed below.

Suitable cables:
Belden 1695A, CommScope 2279V

UHD optimized cables:
Belden 4694P

Neutrik