OpticalCon® 4 pole Y-split cable
Assembled Y-split cable with 4 multimode fibers and 2 OpticalCon® connectors on each end. Excellent cable retention due to aramid yarn, black PUR outer jacket. Perfect for high bandwith audio and video or additional control signal transmission, where a typical send return 2 pole solution is not sufficient.
The OpticalCon® cable connector accommodates a standard optical LC-Duplex connector in a ruggedized and durable all-metal housing. It features a push-pull locking mechanism and an excellent cable retention utilizing the aramid yarn. The optical connection is exceptional well protected against dirt and dust by an automatically operated sealing cover.
The cable connector comes pre-assembled and is not available as a single component. The cable with additional protection boot is available in different lengths and is packed either in a case, on drum or airspool.
Recent OpticalCon® News
Features & Benefits
- Ruggedized and dirt protected fiber optic connection system
- Waterproof acc. to IP65 safety standard in mated condition
- Robust 4 pole multimode Y-split cable
- Accommodates standard optical LC-Duplex connectors
- Cable connector features rugged all metal housing and heavy duty cable retention
- Excellent dust and dirt protection due to automatic sealing shutter with silicone gasket
- Reliable Push-Pull locking mechanism
- Easy to clean, no tools required
- Cable packed in case, on drum or air spool
| There are no technical infos for this product.(210_t3_908223793) |
| Product |
| Connector Type | OpticalCon |
| Gender | male |
| Electrical |
| Mechanical |
| Cable retention force | 300 N |
| Insertion force | < 45 N |
| Withdrawal force | < 45 N |
| Lifetime | > 1000 mating cycles |
| Locking device | Push-Pull |
| Cable | 4M |
| Material |
| Boot | Rubber (EPDM) |
| Bushing | Zinc diecast (ZnAl4Cu1) |
| Insert | Polyamide (PA 6, PBT 30 % GR, PBT 50 % GR) |
| Shell | Zinc diecast (ZnAl4Cu1) |
| Shell plating | Hard Nickel or Ruthenium |
| Strain relief | Polyacetal (POM) (brass) |
| Environmental |
| Flammability | UL 94 HB |
| Protection class | IP 65 |
| Temperature range | -25 °C to +75 °C |
| Optical |
| Insertion loss | < 0.5 dB / connection |
| Optical connector | LC-Duplex |
| Mobile Cables |
| Colour | black, matte |
| Core diameter | 50 µm |
| Cladding diameter | 125 µm |
| Jacker | PUR |
| Minimal bending radius | 10 cm |
| Number of fibers | 4 |
| Cable retention | Aramid yarn |
| Weigth | 103 kg/km |
| Overal diameter | 9.5 mm |
| (1) | Not compatible to the SMPTE standard, suitable for indoor studio applications acc. IEC 60664-1 (pollution degree 1, over voltage category 1) |
|