Products > Lighting > XLR > XLR Chassis Connectors > AA Series

AA Series

New most cost-effective round plastic body XLR PCB mount panel connector. Front panel cutout and pcb layout 100% compatible to A series. New "tulip" type contact design with high contact pressure for highest durability. Available as 3 pole male and female connectors. UL recognized component.

Termination
V = vertical pcb mount, straight pins
H = horizontal pcb mount, angled pins

Locking mechanism
-0 = no latch, retention spring
No suffix = latch lock

Grounding options
Male connector
-0 = ground contact connected to shell ground, but not to front panel and Pin 1
-1 = mating connector shell to pin1 and front panel
w/o suffix = separate ground contact to mating connector shell and front panel

Female connector
-1 = mating connector shell to pin1 and front panel
-2 = separate ground contact to mating connector shell and front panel
w/o suffix = without ground / shell contact

Rear panel mount

Fastening
Self-tapping PLASTITE® screw with thread 2.9x1.06 mm and of tri-rondular configuration (A-screw)
(PLASTITE® is a registered trademark of SFS Unimarket)

Panel thickness 1 - 3 mm

 
NC3FAAH

NC3FAAH

3 pole female XLR receptacle, grounding: without ground/shell contact, horizontal PCB mount

NC3FAAH-0

3 pole female XLR receptacle, grounding: without ground/shell contact, horizontal PCB mount, retention spring instead of latch

NC3FAAH1

3 pole female XLR receptacle, grounding: mating connector shell to pin1 and front panel, horizontal PCB mount

NC3FAAH1-0

3 pole female XLR receptacle, grounding: mating connector shell to pin1 and front panel, horizontal PCB mount, retention spring instead of latch

NC3FAAH2

3 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, horizontal PCB mount

NC3FAAH2-0

3 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, horizontal PCB mount, retention spring instead of latch

NC3FAAV

3 pole female receptacle, grounding: without ground/shell contact, vertical PCB mount

NC3FAAV-0

3 pole female XLR receptacle, grounding: without ground/shell contact, vertical PCB mount, retention spring instead of latch

NC3FAAV1

3 pole female XLR receptacle, grounding: mating connector shell to pin1 and front panel, vertical PCB mount

NC3FAAV1-0

3 pole female XLR receptacle, grounding: mating connector shell to pin1 and front panel, vertical PCB mount, retention spring instead of latch

NC3FAAV2

3 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, vertical PCB mount

NC3FAAV2-0

3 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, vertical PCB mount, retention spring instead of latch

NC3MAAH

3 pole male XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, horizontal PCB mount

NC3MAAH-0

3 pole male XLR receptacle, grounding: ground contact connected to shell ground, but not to front panel and Pin 1, horizontal PCB mount

NC3MAAH-1

3 pole male XLR receptacle, grounding: mating connector shell to pin1 and front panel, horizontal PCB mount

NC3MAAV

3 pole male XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, vertical PCB mount

NC3MAAV-0

3 pole male XLR receptacle, grounding: ground contact connected to shell ground, but not to front panel and Pin 1, vertical PCB mount

NC3MAAV-1

3 pole male XLR receptacle, grounding: mating connector shell to pin1 and front panel, vertical PCB mount
NC3FAAH1-DA

NC3FAAH1-DA

3 pole female XLR receptacle, grounding: mating connector shell to pin1 and front panel, horizontal PCB mount, asymmetric push
NC3FAAV1-DA

NC3FAAV1-DA

3 pole female XLR receptacle, grounding: mating connector shell to pin1 and front panel, horizontal PCB mount, asymmetric push